Fluor Corporation provides engineering, procurement, and construction (EPC); fabrication and modularization; operation and maintenance; asset integrity; and project management services worldwide. It operates through four segments: Energy Solutions, Urban Solutions, Mission Solutions, and Other.
The Energy Solutions provides solutions to the energy transition markets, including asset decarbonization, carbon capture, renewable fuels, waste-to-energy, green chemicals, hydrogen, nuclear power, and other low-carbon energy sources. It also provides consulting services, including feasibility studies, process assessments, and project finance structuring; and a range of services for small modular reactor technologies, as well as operation support services for nuclear power facilities and managing waste. This segment serves the oil, gas, and petrochemical industries.
The Urban Solutions segment offers EPC and project management services to the infrastructure, advanced technologies, life sciences, and mining and metals industries. This segment also provides staffing services to the company and third-party clients with technical, professional, and craft resources on a contract or permanent placement basis. The Mission Solutions offers technical solutions to the U.S. and other governments. It also delivers solutions for nuclear security and operation, nuclear waste management, and laboratory management; and operation and maintenance, logistics, EPC, and life support solutions for mission-critical facilities across U.S. military service organizations. This segment offers site management, environmental remediation, and decommissioning for nuclear remediation at governmental facilities, as well as services to commercial nuclear clients. The Other segment researches, develops, licenses, and commercializes small modular nuclear reactor technology. It also provides unionized management and construction services. The company was founded in 1912 and is headquartered in Irving, Texas.
Click on Job Title for more Details/Apply
Saudi Arabia
Saudi Arabia
Project Controls Specialist – Planner
Saudi Arabia
South Africa
Belgium
Design Engineer IV (Control Systems)
Saudi Arabia
Assoc Design Engineering Specialist III
Philippines
Philippines
Philippines
Sales Analyst with Process Engineering Experience
South Africa
Project Manager – Underground Mining Projects
South Africa
Netherlands
Emergency Communications Engineer
United States
Emergency Communications Systems Senior Designer
United States
Associate Design Engineer II ( Piping)
Saudi Arabia
United States
Underground Construction Manager
Canada
Director I, Process/Specialty Eng
United States
Director I, Design Engineering
United States
Building Design Specialist III
United States
Principal Project Support Technician/ Project Administrative Assistant
United States
United States
Small Capital Construction Manager
United States
Senior Environmental Permitting Manager
Fire Alarm Maintenance Technician (TS/SCI with Polygraph Required)
United States
Netherlands
Netherlands
Netherlands
Civil Structural Engineer – Stein
Netherlands
United States
United States
Netherlands
Associate Design Engineer I – Civil/Structural
United States
Poland
United States
Principal BIM Construction Coordinator
United States
Project Controls Engineer (Rotterdam)
Netherlands
Civil Structural senior design supervisor (Stein)
Netherlands
United States
Supervisor, Contract Management
United States
Contract Admin Spec III (Operations)
United States
Director II, Contract Management
United States
Project Controls Specialist IV – Planner
United States
New Graduate – Construction/Civil Engineer (Infrastructure)
United States
Senior Contract Administrator, Contract
United States
United States
Senior Manager, Contract Management
United States
United States
United States
Structural Senior Design Engineer
United States
United States
Project Engineering Manager – Underground Mining Projects
South Africa
Netherlands
Piping Senior Design Engineer – Nuclear & Civil
United States
Senior Pipe Stress Design Engineer (Greenville)
United States
Piping Principal Designer – Nuclear & Civil (Houston)
United States
Piping Design Specialist – Nuclear & Civil (Houston)
United States
Piping Designer II – Nuclear & Civil
United States
Piping Design Engineer II – Nuclear & Civil
United States
Piping Design Engineer I – Nuclear & Civil
United States
Piping Principal Designer – Nuclear & Civil (Greenville)
United States
Piping Design Engineer IV – Nuclear & Civil
United States
Piping Design Engineering Specialist III – Nuclear & Civil
United States
Piping Designer II – Nuclear & Civil (Houston)
United States
United States
New Graduate -Mechanical
United States
New Graduate – Chemical (Process)
United States
Senior Piping Lead Engineer (Bergen op Zoom/Rotterdam)
Netherlands
Lead Piping Design Engineer (m/w/d)
Germany
Piping Principal Design Engineer – Nuclear & Civil
United States
United States
United States
Project Controls & Estimating Specialist (Bergen op Zoom)
Netherlands
Senior Electrical Engineer (Bergen op Zoom/Rotterdam)
Netherlands
Principal Specialist/Supervisor, Material Management (Lead Buyer)
Philippines
United States
United States
Specialist III, Material Management (Buyer)
Philippines
Philippines
Philippines
Philippines
Senior Process/Specialty Engineer
United Kingdom
United Kingdom
Procurement Specialist (TS/SCI with Polygraph Clearance Required)
United States
Telecommunications/Networking Engineer
United States
India
Buyer (TS/SCI with Polygraph Clearance Required)
United States
Senior Telecom/Network Engineer
United States
Procurement Specialist (Active Secret Clearance Required)
United States
Buyer/Purchaser (Active Secret Clearance Required)
United States
Associate Estimating Software Specialist
Philippines
Senior Human Resources Specialist
Philippines
Philippines
Process/Specialty Engineer III
United Kingdom
United States
United States
Canada
Estimating Software Specialist I
Philippines
Belgium
Belgium
Belgium
Belgium
Control Systems Associate Design Engineer III
United States
Project Controls Specialist II
United States
Belgium
Belgium
United States
United States
Electrical & Instrumentation Estimator
Philippines
Belgium
Philippines
Philippines
Senior Manager, Labor Relations
United States
Principal Process/Specialty Engineer
United States
Senior Project Controls Specialist
Netherlands
South Africa
Headquarters Operations Manager (Active TS/SCI with Poly Reqired)
United States
United States
Turbine Millwright Superintendent – Sr Mgr, O&M Operations
United States
United States
United States
United States
United States
United States
United States
United States
Progress Specialist – Peptide 1
United States
Cost Specialist- Small Molecule
United States
Scheduler- S/SPG
United States
United States
United States
United States
Progress Specialist- Tank Farm
United States
Progress Specialist- Small Molecule
United States
Supervisor, Contract Management
United States
Project Controls Specialist II (Site/Campus Scheduler)
United States
Senior Project Controls Specialist (Cost Specialist – Procurement)
United States
Canada
United States
United Kingdom
United Kingdom
United States
United Kingdom
18BC12 Director I, Design Engineering (23)
United Kingdom
United Kingdom
Associate Design Engineer I – Electrical
United States
Electrical Engineer (Design Engineering Specialist III)
United Kingdom
United Kingdom
Electrical Engineering Specialist
United Kingdom
Associate Project Controls Specialist II
United Kingdom
United States
United States
United Kingdom
Philippines
Piping Lead Engineer – Office Poortugaal
Netherlands
Environmental and Regulatory Specialist
Canada
Senior Project Information Manager
United Kingdom
United Kingdom
Project Payables Technician III
United States
United States
United States
Associate Process/Specialty Engineer II
Saudi Arabia
Philippines
United Kingdom
Netherlands
HVAC Design Engineer IV – Nuclear and Civil
United States
HVAC Design Engineer III – Nuclear and Civil
United States
Assoc Project Controls Specialist III
United States
Principal Project Controls Specialist
United States
Project Controls Specialist III
United States
Associate Project Controls Specialist I
United States
Senior Project Controls Specialist
United States
Piping Design Specialist – Nuclear & Civil
United States
Project Automation Spec I – Nuclear & Civil (Greenville)
United States
United States
United States
United States
HVAC Engineer – Advanced Technology – Semiconductor
United States
Associate Project Controls Specialist
Philippines
Construction Site Manager- Road/Bridge/Highway
United States
Senior Instrumentation & Control Systems Design Engineer (m/w/d)
Germany
United States
Site Support- Human Resources Specialist II
United States
United States
Denmark
United States
United States
Senior Contract Administrator, Contract
United States
United States
Technical Writer – Fluor Nuclear Power
United States
Denmark
United States
Finance Business Services Manager (Active TS/SCI with Poly Required)
United States
Plumber (TS/SCI with Polygraph Clearance Required)
United States
Watch Engineer (TS/SCI with Poly Clearance Required)
United States
Senior Security Manager (Active TS/SCI with Poly Required)
United States
Associate Design Engineer III – Electrical
Saudi Arabia
Specialist- Material Management
India
Associate Process/Specialty Engineer I
United States
Engineering Technician I – Process (Internship)
United States
Sr Architect – Facility Integration Group (FIG) – Adv Technology
United States
United States
Tool Install Estimator – Semiconductor
United States
Mechanical Equipment Engineer IV – Semi-Conductor
United States
United States
Design Engineer II. Structural
United States
Design Supervisor – Structural
United States
Construction Support Specialist II
United States
IT Compliance Support Specialist
United States
Benefits Manager, Human Resources
United States
United States
Director I, Design Engineering
United States
Process Design Engineer I Nuclear & Civil
United States
Process Design Engineer II Nuclear & Civil
United States
Process Engineering Technician Nuclear & Civil
United States
Superintendent (Active Top Secret Clearance Required)
United States
Commissioning & Qualification Manager II
United States
United States
Senior Contract Administrator (Remote)
United States
United States
United States
United States
United States
United States
United States
Advanced Work Packaging Planner Lead I
United States
Electrical Superintendent- Nodes
United States
United States
United States
Principal Specialist, Material Management
United States
Associate Project Controls Specialist II
United States
United States
Senior Design Engineer – I&C Systems
United States
Document and Data Mgmt Specialist II
United States
Document & Data Mgmt Technician II
United States
United States
Electrical Senior Design Supervisor (Houston)
United States
United States
United States
United States
General Maintenance (TS/SCI with Polygraph Clearance Required)
United States
Senior Project Information Manager
Philippines
Philippines
Senior Hexagon S3D Administrator
Philippines
United States
Netherlands
Senior Manager, Contract Management
United States
Principle Construction Eng (Piping)
United States
United States
Design Engineer II – Electrical
United States
United States
Senior IT Specialist (TS/SCI Clearance Required)
United States
United States
United States
United States
United States
United States
Process/Specialty Engineer III – Aseptic Fill & Finish
United States
United States
United States
United States
United States
Senior Project Controls Specialist
United States
Principal Project Controls Specialist (Planner)
United States
Senior Project Controls Specialist
United States
Principal Estimator-Capital Projects in Energy Industry a MUST
United States
Principal Project Controls Specialist (Cost)
United States
Project Controls Specialist II
United States
United States
Financial Analyst / Cost Engineer
United States
United States
United States
United States
Principal Electrical Engineering Coach
United Kingdom
United States
Canada
Assoc Project Controls Specialist III (Tank Farm)
United States
Philippines
United States
E&I Quality Control Supervisor
United States
United States
Principal, Contract Management
United States
United States
General Superintendent I Mechanical/Piping
United States
United States
Project Controls Specialist II
United States
General Construction Manager (CDI-SME Electrical)
United States
United States
United States
Senior Project Controls Specialist – Cost
United States
United States
United States
United States
Operators & Maintenance Supervisor (LINXS)
United States
Field Service Engineer – Vehicles (LINXS)
United States
Project Controls – Scheduler (Transit Experience)
United States
Reporting Analyst / Board and Performance Reporting
United States
United States
Project Controls Specialist IV – Scheduler
United States
Design Engineer III – Structural
United States
Design Engineer III – Architectural
United States
United States
United States
Senior Process/Specialty Engineer
United States
Designer II – Instrumentation and Controls
Senior Environmental Permitting Manager
United States
United States
Utilities Project Manager – City/County
United States
Construction Safety Lead (CSL)
United States
Assistant Project Manager – ROW Specialist
United States
Senior Utilities Project Manager
United States
Regional Talent Acquisition Lead
Philippines
Procurement Specialist/ Specjalista ds. Zakupów
Poland
Specjalista ds. kontraktowania usług budowlanych
Poland
Specjalista ds. Kontroli Kosztów
Poland
Philippines
Philippines
Associate Process/Specialty Engineer I (New Graduates)
Philippines
Human Resources Specialist II (Shared Services Generalist)
Philippines
United States
United States
United States
United States territory
Control Systems Principal Design Engineer
United States
Project Director I – Mining and Metals
United States
United Kingdom
United States
United States
HSE in Design Engineer – Advanced Technology
United States
Senior HSE Technical Specialist – PHA Facilitator
United States
Construction Progress Specialist
United States
United States
General Superintendent (Excavation/Grading)
United States
United States
United States
HVAC Engineer – Advanced Technology
United States
United States
United States
Construction Engineer VI -Roadway
United States
Dir II, O&M – Operational Readiness – Reliability
United States
United States
Technical Expert – Transmission and Distribution
Indonesia
United States
Project Manager – Utilities (Rail/Irrigation/Water/Drainage)
United States
Utilities Asst. Project Managers – Water, Electric, Gas, Telecom
United States
Asst. Project Manager – Utilities Design Reviewer
United States
Contract Specialist Third Party Agreements
United States
Government Property and Material Management Supervisor
United States
United States
United States
Philippines
Philippines
Sr Project Automation Specialist
Sr Project Automation Specialist
United States
Associate Project Automation Spec I
United States
Senior / Principal Process Engineer
Canada
Process Engineer – Simulation Specialist
Canada
Design Engineer II – Instrumentation & Controls
United States
United States
United States
United States
United States
United States
Document & Data Management Spec III – Engineering
United States
Design Engineer II – Structural Change Mgmt
United States
Project Information Management
United States
United States
United States
United States
United Kingdom
United States
Project Information Manager – Advanced Technology – Semiconductor
United States
United States
Six Sigma Black Belt – Deputy Manager of Process & Program Development
United States
Project Engineer III – Strategic Delivery
United States
United States
United States
United States
Project Director I – Portsmouth
United States
Proposal and Marketing Manager
United Kingdom
Philippines
Philippines
Civil Structural Design Engineer
United States
United States
United States
Principal Process/Specialty Engineer
United States
Senior Estimator- Small Cap Team
United States
Project Manager III- Small Cap Team
Senior Estimator
United States
Process/Specialty Engineer III
United States
Principal Project Controls Specialist – Cost & Scheduling
United States
United States
United States
Design Engineer I – Control Systems
United States
Principal Designer – Electrical
United States
United States
Supervisor, Material Management
United States
United States
CAD Designer – Mechanical / Material Handling
United States
Design Engineer IV – Electrical
United States
Senior Design Engineer – Electrical
United States
Design Engineer III – Instrumentation and Controls
United States
Sr Manager, Prime Contract Mgmt
United States
Project Controls Specialist III / Program Change Coordinator
United States
Project Controls Specialist/Scheduler
United States
Assoc Project Controls Specialist III
United States
United States
HVAC Engineer – Advanced Technology
United States
United States
United States
Assoc Project Controls Specialist III (Cost)
United States
Senior Executive Administrative Assistant
United States
United States
United States
Project Administrative Assistant
United States
Director I, Estimating/Baseline Estimating Lead
United States
Associate Design Engineer II (Control System)
Saudi Arabia
Material Movement and Modular Furniture Technician
United Kingdom
Field Human Resources Specialist
United States
Spec III, Material Mgmt. (Remote)
United States
Canada
Document & Data Management Lead
Canada
Document & Data Mgmt Technician II
United States
Design Engineer III – Structural
United States
Principal Construction Support Engineer
United Kingdom
Process/Specialty Engineer III
Saudi Arabia
Static Equipment Mechanical Engineer
Netherlands
Senior Electrical Design Engineer
United States
United States
United States
Associate Electrical Design Engineer II
United States
Netherlands
Project Business Services Accountant
Philippines
Project Business Services Accountant
Philippines
United States
United States
United States
Building mechanical system Design Engineer IV
United States
United States
Finance Manager – Project Business Services
United States
Philippines
Netherlands
Junior HSE & Sustainability Engineer
Netherlands
United States
Principal Process/Specialty Engineer
United States
Netherlands
United States
United States
United States
Project Controls Specialist IV- Small Cap Team
United States
Mechanical Design Engineer II Nuclear & Civil
United States
United States
Construction Support Engineer IV
United States
Senior Process Engineering Technician
United States
Senior Manager, Human Resources
Indonesia
HVAC Senior Designer Nuclear & Civil
United States
HVAC Design Specialist Nuclear & Civil
United States
United States
Associate Design Engineer II, Structural
United States
Canada
United States
Mechanical Building Systems Principal Designer
United States
Philippines
United States
United States
Australia
Philippines
United States
Project Business Services Accountant
Philippines
Project Business Services Accountant
Philippines
Plumbing Design Engineer – Advanced Technology – Semiconductor
United States
United States
United States
Fire Protection Systems Engineer
United States
United States
United States
Instrumentation and Controls Design Engineer
United States
United States
E&CS Lead Engineer – Office Stein
Netherlands
Senior Contract Administrator (TS/SCI)
United States
United States
Facility Maintenance Lead (TS/SCI with Polygraph Clearance Required)
United States
United States
Germany
Senior Control Systems Designer
United States
Tool Install Project Engineer I – Semiconductor
United States
Philippines
Project Accounts Payables Clerk
Canada
United States
Principal Design Engineer – Control Systems
Sugar Land
Associate BIM Automation Specialist II
United States
Senior Proposal and Marketing Specialist
United States
Assoc Project Controls Specialist III
United States
United States
Locksmith (TS/SCI with Polygraph Required)
Locksmith (TS/SCI with Polygraph Required)
United States
Designer – AutoCAD (TS/SCI with Polygraph Clearance Required)
United States
United States
Senior Design Engineer, Structural
United States
Philippines
Project Manager III – Mining and Metals
United States
Design Engineer IV, Structural
United States
HSE Specialist IV (TS/SCI Clearance Required)
United States
